Cool Humidifier Room 2 Tons 2000COHU
1.000 $
After drying, cashew kernels need to be conditioned with cool, moist air so they reach the right moisture balance before peeling and grading. This step reduces brittleness and breakage and helps preserve the quality of every kernel. The Cool Humidifier Room 2000COHU is designed for this stage, handling 2,000 kg of kernels per cycle in an insulated chamber that keeps temperature and humidity under control.
After drying, cashew kernels need to be conditioned with cool, moist air so they reach the right moisture balance before peeling and grading. This step reduces brittleness and breakage and helps preserve the quality of every kernel. The Cool Humidifier Room 2000COHU is designed for this stage, handling 2,000 kg of kernels per cycle in an insulated chamber that keeps temperature and humidity under control.
Overview
The 2000COHU combines an insulated room, a wood-fiber cooling pad system, three external blowing fans, and a water pump into one complete humidification solution. Hot air passes through the wet cooling pad and comes out as cool, moist air, which is then blown into the room to condition the kernels evenly. An internal heater system is also included for temperature adjustment, with a heating time of 45 minutes.
Key Advantages
Natural evaporative cooling. The honeycomb-shaped wood-fiber cooling pad works as a heat exchanger. Hot air flows through the wet pad and leaves cool and humid, creating ideal conditions for the kernels without complex machinery.
Gentle, even conditioning. Three 1.5 HP fans mounted outside the room blow air through the cooling pad and distribute humidified air to the kernels, so moisture is absorbed uniformly.
Stable internal climate. The room is built with 50 mm insulated RPS panels, which keep temperature and moisture steady throughout the cycle.
Reliable water supply. A 1.5 HP pump with a cast iron body supplies water to the cooling pad continuously and dependably.
Low operating cost. The entire system uses only 2.5 kWh (3-phase, 380V), making it economical to run through each 8 to 10 hour cycle.
Construction and Components
Room structure
- Steel frame: Box steel 40 mm x 80 mm, 1.8 mm thick, for a durable and rigid structure.
- Wall panels: RPS insulation panels, 50 mm thick, density 12 kg/m³, to keep temperature and humidity stable inside the space.
Humidification system
- Cooling pad system (1 unit): Wood fiber, honeycomb design, 5 m x 3.6 m x 2.0 m. Made in Vietnam.
- Indirect blowing fans (3 units): 1.5 HP each, installed outside the room and blowing through the cooling pad to deliver humidified air to the kernels.
- Water pump (1 unit): 1.5 HP, cast iron pump body, supplying water to the cooling pad.
Heating system
- Internal heater: Installed inside the room, with a heating time of 45 minutes.
Technical Specifications
| Specification | Details |
|---|---|
| Model / Cargo code | Cool Humidifier Room 2 Tons, 2000COHU |
| Dimensions (L x W x H) | 5.2 m x 3.7 m x 2.0 m |
| Power consumption | 2.5 kWh, 3-phase, 380V |
| Capacity per cycle | 2,000 kg |
| Humidification time | 8 to 10 hours on average (depending on the kernels) |
| Cooling pad | Wood fiber, honeycomb design, 5 m x 3.6 m x 2.0 m |
| Blowing fans | 3 units, 1.5 HP, installed outside the room |
| Water pump | 1 unit, 1.5 HP, cast iron body |
| Frame | Box steel 40 mm x 80 mm, 1.8 mm thick |
| Wall panels | RPS, 50 mm thick, 12 kg/m³ |
| Heater | Internal, 45 minutes heating time |
Why Choose the 2000COHU?
For processors who want consistent kernel conditioning without complicated equipment, the 2000COHU offers a simple and effective solution: natural evaporative humidification, a well-insulated chamber, low power consumption, and dependable components. It helps protect kernel quality and prepares your product for the next stage of processing.
Contact us today for pricing, technical consultation, or installation support.
Related products
